HusaB 450 -09 EU 50h - my speedometer dosen’t start lighting when I start the bike as it should.
• If I start the bike and spin the front wheel it start lighting.
• If I only spin the front wheel without staring the bike, working but not lighting.
• If I press the right button the speedom start and I can switch between km/h, h, ODN. Still not lighting.
• If I press the right button and then start the bike, the speedom start lighting.
• I have checked fuse no. 4
I have tried with a brand new speedo, it’s the same scenario.
When the bike is started I have 12V in the yellow/blue cable and the two browns are grounded.
Do you have any ide what to try more?
//Carl
• If I start the bike and spin the front wheel it start lighting.
• If I only spin the front wheel without staring the bike, working but not lighting.
• If I press the right button the speedom start and I can switch between km/h, h, ODN. Still not lighting.
• If I press the right button and then start the bike, the speedom start lighting.
• I have checked fuse no. 4
I have tried with a brand new speedo, it’s the same scenario.
When the bike is started I have 12V in the yellow/blue cable and the two browns are grounded.
Do you have any ide what to try more?
//Carl
