This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

New Member

Joined Dec 2015
2 Posts | 0+
Australia
I would like to introduce myself as a new member to the group coming from Australia.
I have recently purchased off my brother in law a 2009 FE 570 and am looking for some help re some issues I bought it with.(Knowingly only paid $1200)

The bike will start and idle no problems, once I get on and ride it and fairly get up it Fuse 2 will blow. Once it sits for a while(10 Minutes) if I replace the fuse then it will start again and idle no problems. I have read other posts in this forum and see that there have been a lot of fuel pump issues so am thinking that it could be the same problem. Why though does it idle. I have checked a lot of the wiring, moved while it was idling and seems to be fine. Just before it stops the F1 light comes on.
If it is, where is Australia is the best place to get another fuel pump and are they difficult to install, what price. I thought it may be removed from the top of the tank, took the 4 screws out and fuel line/electrics but seems to still be attached at the bottom of the tank, is this correct? Is this the best way to access it.

Next question, it has a fairly serious oil leak coming out of the slave cylinder end of the clutch housing, under the chain guard, there is no o ring in here, should there be one. I have used a sealant around the housing but looks to me like it should have a oring. Would this be correct.
Any help would be much appreciated .

Thanks in advance

Craig Cook
Australia Alice Springs
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions