This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

need to clean inside frame on husa 501 92 how to?

Joined Dec 2011
2 Posts | 0+
Here is a picture. http://imageshack.us/photo/my-images/818/imag0111v.jpg/

Full of dirt inside, if i remove the carb tube and the tube that goes down to the
engine Can i just flush it with water? Or Will i get water somewere else where
i dont want it then. Bought the bike yesterday, only had 2stroke before so Its all New
To Me. But dirt in the airintake Can be good.

Sorry för my bad english :)
 
Once you remove the carb intake you can flush the frame out without any problems.
 
Okay Thanks :) the other tube, the small One that goes down to the engine, what is that for? Ventilation maybe?
 
like the others said, removed the intake boot and block off the carb inlet and removed the breather tube between engine and frame and clean away! pressure washer or brake klean and compressed air would likely work the best, just make sure its dried when you put filter and carb boot back and your good to go
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions