Motosportz steering damper install, with pics. - '09 FE570

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
fizz said:
I am confused about the collar of the damper stationar y support pin and how it attaches to the bike without rotating as you turn the handlebars. The silver bearing race around the frame head rotates with the handlebars and the area under this is very tight. Is there a groove in the frame support of the damper collar that goes into the groove under the bearing race?

http://cgi.ebay.com.au/Motosportz-Steer ... 2a02e37961


Thanx in advance
Fizz
Click to expand...

Not so much of a groove as it is just a slightly smaller diameter. You have to fiddle with the collar to get it in the right place exactly or it won't fit. And yes, it is a bit difficult to get it in there. Not a lot of wiggle room.

damper_install9.jpg
 

Similar threads

F
FE570 low idle issue, outside of the usual suspects! (I think)
Replies
3
Views
723
emanujo
E
S
Steve's 2007 Husaberg FE650E aka Big Berg
Replies
2
Views
88
steve
S
S
Steve's 1998 FE501 Husaberg
Replies
1
Views
139
maxxx56
maxxx56
K
AM fuel pump parts sourcing problems
Replies
1
Views
1K
o6550
o6550
L
For Sale 2011 FE 570 S - 80 hours, 1546 miles
Replies
6
Views
3K
Tinomazz64
T

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top