KTM v Husaberg valve stacks

DanBeaven · May 9, 2011

does anyone know where to find out the standard valve stacks? Looking for KTM xc (250/300) and Husaberg two stroke (TE 250/300) 2011 fork valving differences and shock if possible

Have done back to back tests with both bikes and it's interesting the diference in the two setups!

aaronc70 · Dec 23, 2011

I'm also wondering this. I own a 2008 200XC and rode the 2012 TE300 at a demo and loved the suspension. I was wondering if I could put those stacks, front and rear, in my '08 bike and make it better. Obviously the stacks are different, I wonder if the vavles are the same or if they went to a more high-flow valve set up (like Race-Tech) to achiever better results?

Any help is appreciated!

Johnf3 · Dec 23, 2011

aaronc70 said:
I'm also wondering this. I own a 2008 200XC and rode the 2012 TE300 at a demo and loved the suspension. I was wondering if I could put those stacks, front and rear, in my '08 bike and make it better. Obviously the stacks are different, I wonder if the vavles are the same or if they went to a more high-flow valve set up (like Race-Tech) to achiever better results?

Any help is appreciated!

Putting the 2012 valving in your 2008 will help but it will not be the same. The 2012 suspension has lower friction seals and bushings and a different design for the cartridge seal head. Add all these to the 2008 with the 2012 stacks AND polish the fork tubes correctly and it will be very close. The upgrade kit is available as a KTM hard part. Very worthwhile upgrade.

Search

Search

KTM v Husaberg valve stacks

DanBeaven

aaronc70

Johnf3

Similar threads

Register CTA

Recent Discussions