Looking for anybody who has a good handle on jetting specs that work for the 04 FE 450 E. This is the first pumper carb that I have owned and would just like to know what others have experienced. I ride mostly forested trails 3500-8000 Ft. elevations 70 to 100 degrees. :?:
Joined Nov 2001
17K Posts | 774+
Ely, England
post your jetting here and we'll have a look at it. come to think of it pineman i think we've seen the jetting last november via scully.
it's very close to spot on to be fair. the only thing to check for a PERFORMANCE gain is that you are running an E-series needle. you'll find the needle code should be OBE**. i run an OBEKQ.
if you have any starting, bogging, dead areas etc let us know but if it runs great then leave alone.
here
in this document i have put the jetting figures for my bike which will be virtually identical.
regards
Taffy
it's very close to spot on to be fair. the only thing to check for a PERFORMANCE gain is that you are running an E-series needle. you'll find the needle code should be OBE**. i run an OBEKQ.
if you have any starting, bogging, dead areas etc let us know but if it runs great then leave alone.
here
in this document i have put the jetting figures for my bike which will be virtually identical.
regards
Taffy
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
