Joined Feb 2005
75 Posts | 0+
Lancashire
On the back of the starter motor thread I posted earlier it now looks like everything is OK.
After the not turning the motor and just spinning it has suddenly started working perfectly! 8O The only thing I've done is remove the carb (again) for cleaning and replace. The bike started up easily on the kickstart so when it was warm I just hit the start switch and hey presto! the motor fired into life. After several attempts at starting and stopping the starter motor now turns the engine over every time.
Did some Swedish fairies come and fix the sprague bearing overnight?
After the not turning the motor and just spinning it has suddenly started working perfectly! 8O The only thing I've done is remove the carb (again) for cleaning and replace. The bike started up easily on the kickstart so when it was warm I just hit the start switch and hey presto! the motor fired into life. After several attempts at starting and stopping the starter motor now turns the engine over every time.
Did some Swedish fairies come and fix the sprague bearing overnight?
Although the time spannering far out weighs riding at the moment so I need to restore the balance. Surely even a tempremental Husaberg should be ridden more often than repaired 
