Joined Nov 2001
17K Posts | 774+
Ely, England
well according to my take on that photo, the bearing has already moved!
that photo is from bergoroadracer AKA 'takis the greek'. He has so much money that he has one foot in the back door at the factory and this is a mod that was recommended to him by the works.
i don't do it, i bond mine in with a proper bearing agent. the bearings are a VERY tight fit in the cases anyway. on reflection this was done before everyone knew some of the answers.
regards
Taffy
that photo is from bergoroadracer AKA 'takis the greek'. He has so much money that he has one foot in the back door at the factory and this is a mod that was recommended to him by the works.
i don't do it, i bond mine in with a proper bearing agent. the bearings are a VERY tight fit in the cases anyway. on reflection this was done before everyone knew some of the answers.
regards
Taffy
Joined Jun 2007
4K Posts | 1K+
south east WA Australia
bearing looks like its shagged and has a steel cage.. odd
roller end radius looks non SKF
in my Ccases if the interference fit is less than 0.05mm the bearing is loose when the bike is hot
loctite 609 works well, id not do this mod unless the loctite was failing.
roller end radius looks non SKF
in my Ccases if the interference fit is less than 0.05mm the bearing is loose when the bike is hot
loctite 609 works well, id not do this mod unless the loctite was failing.
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
