This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

How much Fork Oil for a FE400E please?

P

paul-carts

Joined Mar 2013
6 Posts | 0+
Hi
New to Husabergs as I have just aquired a 1999 FE400E with a few issues, previous owner stated it need finishing off.
Just replaced fork oil seals but am a little puzzled by how much oil to add, always done it on volume on previous bikes.
Can anybody help please?
Thanks
Paul
 
remove spring, compress the fork and just fill it to get an air gap that suits your riding style. approx 100mm.
 
Thanks ned
Just to confirm, push the fork tube all the way down into the leg and fill to approx 100mm from top of tube, not sure what my riding style is at the minute but it gives me a start
thanks
paul
 

Similar threads

F
FE570 low idle issue, outside of the usual suspects! (I think)
Replies
1
Views
418
rikschipp
R
W
2010 Fx450 crank no start after engine work
Replies
3
Views
476
waylon
W
K
Red exhaust pipe after slip-on install.
Replies
3
Views
623
MountainBerg
M
K
AM fuel pump parts sourcing problems
Replies
1
Views
1K
o6550
o6550
T
Oil capacity te 300 wp closed forks
Replies
0
Views
2K
tom2515
T

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions