How far to push the bearing?

jmscrttndn · May 5, 2015

Hello,

I just installed a bunch of new engine bearings. One of the bearings gave me some trouble.

There is an ambiguous directive in the shop manual. It says to push the bearing until it is flush with the housing.... flush with the inside of the housing or outside of the housing?

I assumed that it should be flush with the OUTSIDE of the housing (since the clutch cylinder sits there). Please advise...

I didn't know how far to push this bearing:

bushmechanic · May 5, 2015

flush with the outside

its pretty loose in my cases will probably move a bit when you put the cases together as well

Taffy · May 6, 2015

what you don't shove in, the clutch slave will for you later.....up to you!

Taffy

bushmechanic · May 6, 2015

or if you shove it in too far the shaft flange will push it back out when you put the cases together

put it on the shaft instead LOL

Search

Search

How far to push the bearing?

jmscrttndn

bushmechanic

Taffy

bushmechanic

Similar threads

Register CTA

Recent Discussions

Recent Discussions