This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Hard suspension

Joined Sep 2004
186 Posts | 0+
hello all,


i havea big problem,i have bought a second hand frame( 2001 or 2002 was supermoto or enduro I think),and did a complete set up for motocross training.

There is a 2006 engine in the frame,it l goes well except the suspension,it is impossible to ride for me more than 15 min due to heavy springs.Very bumped and swolln arms.

Tomorrow I will do the sag test.

My question is :

What is normal suspension settings or spring type (2001-2002) for motocross???
FRONT and REAR??
I am 1m 79 and weights about 85-86kg with gear.

Thanks Madero
 
madero

5' 9" and 13 stones.

there is a link in the suspension area f the doc and it profiles the springs on the enduro , MX and SM machines. check but i think it was .46 front and ????

you need about .44 and i think a PDS3 or a straight 88?

regards

Taffy
 
Thanks Taffy for your quick response,

I will look in the doc , Is a .44 suited for my weihgt??

greetings madero
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions