Handle bar position

ajt · Nov 7, 2004

I have found a pretty good handle bar bend, the problem is that I am 6'2'' and it is too low. So can anyone recommend a good height for a handlebar mounts, and the company that makes them? Oh yea I have the scotts bar clamps with a damper so I will have to get a longer pin too.
Thanx

Barry · Nov 7, 2004

I think there have been posts in the past concerning raising the bar height. Do a search, and you'll probably even find pics of the various solutions. I have placed spacers between the triple clamp and the lower bar mount. I have used both machined spacers and tooling washers on my different Bergs, both have worked just fine. The arrangements have survived too many dirt sampling expeditions to count and I am very pleased with the extra height.

Taffy · Nov 8, 2004

go to Taff's gallery for pictures

Taffy

44014 · Nov 8, 2004

or you could simply purchase a one of these

http://www.trailtech.net/billet_dashboards.htm

cheers doug

bahnsy · Nov 8, 2004

Dare i swear on this site, but, KTM have the following parts avaliable.
594.01.039.044 - 37mm Raised Bar Support (Single Part)
594.01.039.144 - 47mm Raised Bar Support (Single Part)
595.01.039.044 - 28, 37, 46mm Raised Bar Support (3 Parts)
Given that Husaberg and KTM share a similar top tripple clamp and bar arrangement, the above parts will go strait on.
If you require pics please asdvise and i will scan and post.

Bahnsy

ajt · Nov 8, 2004

Wow thanx for the quick responses. I am kinda leaning towards the trail-tech lower mount, becuase of the damper pin problem. Can you use this with the stock bar clamps and add some spacers? It looks like it.

44014 · Nov 8, 2004

yerp ya certainly can :wink:

cheers doug

Search

Search

Handle bar position

ajt

Barry

Taffy

44014

bahnsy

ajt

44014

Similar threads

Register CTA

Recent Discussions

Recent Discussions