Joined Dec 2005
47 Posts | 0+
GPR www.gprstabilizers.com has one for our bikes. I just put one on my 04 Fe450e tonight! It looks trick, it raised the bars 3/4 of an inch. I'm a little nervous about the length of the hoses and cables, but there is still slack.
Its an under bar setup, and bolted right on.
I did have to grind down the top nut for the center bolt on the triple clamp for good clearance.
Total install time 1.5 hours, but I was not working fast...I spent 15hrs at work today.
I highly recommend using a longer bolt for the "post mount" clamp, as GPR's is a little short. A stock husaberg bolt approx 35 mm long is the right length (I'm guessing at 35...cause I'm tired) and will prevent stripping the post mount.
I will post a ride report as soon as possible.
Rich.
Its an under bar setup, and bolted right on.
I did have to grind down the top nut for the center bolt on the triple clamp for good clearance.
Total install time 1.5 hours, but I was not working fast...I spent 15hrs at work today.
I highly recommend using a longer bolt for the "post mount" clamp, as GPR's is a little short. A stock husaberg bolt approx 35 mm long is the right length (I'm guessing at 35...cause I'm tired) and will prevent stripping the post mount.
I will post a ride report as soon as possible.
Rich.
