Hi guys
Im in the middle of rebuilding the forks on my 03 fe 400, I got the forks apart and the new seals etc in place, I can't work out how to remove the spring / dampening rod.
I removed a nut and a load of shims/ washers from the bottom of the dampening rod, and now there is a nut that I dont have a socket to fit.
I'm just not sure this is the way to do it, and I don't want to go too much further if I'm going in the wrong direction.
All help would be great.
Many thanks
Ryan.
Im in the middle of rebuilding the forks on my 03 fe 400, I got the forks apart and the new seals etc in place, I can't work out how to remove the spring / dampening rod.
I removed a nut and a load of shims/ washers from the bottom of the dampening rod, and now there is a nut that I dont have a socket to fit.
I'm just not sure this is the way to do it, and I don't want to go too much further if I'm going in the wrong direction.
All help would be great.
Many thanks
Ryan.
