front fork Pro Bleeders

they're going to be identical to ktm aren't they.

regards

Taffy

they are for my 06, marked as ktm 4mm size Motion Pro bleeders, the ones without the thing a ma job.

I have fork bleeders available. If the forks are WP 43mm/48mm, I got ya covered. They're not tall and fragile like the MP ones.....E-mail me, and I'll show ya pictures. Eric

I got my fork bleeders from Hotrodvw also and was trying to pull the fork caps off so I could do the drill, tap, and install but my fork springs or something are holding everything in the tubes... How do I dislodge them so I can remove the internals from the housing/tube?

I think I will be having my forks and shock sent out here in the next couple of months to have Palo Verde do a revalve and depending on what the verdict is, maybe a respring. I know very little about the suspension so I am at the mercy of the pros on this one but I do know that my MX suspension setup is a little too stiff for my riding style.

If anyone can tell me how to get the internals from the fork tube I would appreciate it. Also please include anything that I need to pay attention too or watch out for when removing or installing so i don't force something and break it please.

Thanks for the help fellas.

Regards,

Excellent! :hello1: