First off what mm is my fork seal size,reading my manual is unclear,I don't have the WP manual.Secondly because I set my suspension relatively soft will this contribute to "blowing them" all too often.(2003 FE400E),,,Bless ya
Joined Mar 2006
2K Posts | 4+
mid-wales, uk
go to husaberg home page and down load the '03 parts manual.
page 10 you'll see the seal is item no.9 and measures 48 x 58x 9.5
and no setting the supension soft doesn't make them leak.
fitting them wrong, nics and dings on the sliders, worn out dust seal letting in crap and numerious other things can though.
page 10 you'll see the seal is item no.9 and measures 48 x 58x 9.5
and no setting the supension soft doesn't make them leak.
fitting them wrong, nics and dings on the sliders, worn out dust seal letting in crap and numerious other things can though.
Matty. Give me a cal at 209-938-9726. I have what you need...and you will be very happy to ride again.
Rob
Rob
matty said:
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
