Looking to sale now. $3,000 w/o Clake $3,500 with Clake. 2010 FE450. Hardly any hours. (Sub 30) with paint barely starting to come off clutch over). Starts up ok, but probably needs fuel line, etc cleaned as it has been sitting with gas for a while and would probably benefit from having someone hat knows Husabergs well as the owner.
I am original owner and have the certificate of origin paperwork. Purchased from Bozarth Offroad in 2010. A lot of extras, but a few items to note: I don't have the tail light nor headlight. Have custom graphics with my last name on number plate and rear fenders that you would probably want to cover up.
Just floating this out there. I will not ship, drive to meet, etc. if someone is willing to come to Manhattan Beach to check it out, please swing by.
Here are the extras.
FMF power core 4
Enduro engineering front and rear axle pulls
TPR Front and rear Rear rotor brake and caliper guard
Fastway pegs
Hyde skid plate and radiator guards
Silicon hoses
Enduro engineering handguards
For front fork guards
P3 carbon pipe guard
Step pegz
Mototsports stabilizer
Bulletproof swingarm guard with BRP chain guide
Exhaust wrap and tank heatshield
Upgraded pump and everything
Moto seat gripper seat
Suspension by trail tricks - 210lb rider
Hammerhead designs shift lever
EXTRA: this bike is fitted with a Clake 2 clutch. This thing is awesome. Can return to stock clutch if desired, but this is a fine piece of kit which runs quite a bit of money.
Please PM if interested.
I am original owner and have the certificate of origin paperwork. Purchased from Bozarth Offroad in 2010. A lot of extras, but a few items to note: I don't have the tail light nor headlight. Have custom graphics with my last name on number plate and rear fenders that you would probably want to cover up.
Just floating this out there. I will not ship, drive to meet, etc. if someone is willing to come to Manhattan Beach to check it out, please swing by.
Here are the extras.
FMF power core 4
Enduro engineering front and rear axle pulls
TPR Front and rear Rear rotor brake and caliper guard
Fastway pegs
Hyde skid plate and radiator guards
Silicon hoses
Enduro engineering handguards
For front fork guards
P3 carbon pipe guard
Step pegz
Mototsports stabilizer
Bulletproof swingarm guard with BRP chain guide
Exhaust wrap and tank heatshield
Upgraded pump and everything
Moto seat gripper seat
Suspension by trail tricks - 210lb rider
Hammerhead designs shift lever
EXTRA: this bike is fitted with a Clake 2 clutch. This thing is awesome. Can return to stock clutch if desired, but this is a fine piece of kit which runs quite a bit of money.
Please PM if interested.
Last edited:
