Dellorto carb all recommended jets main#185 needle #dr270 pilot #33 start #45 tried #40 but holes at bottom in bowl the 45 the holes at the top no improvement with #40 clip 2 ,1 turn out on mixture screw new float and float needle and seat ,needle is k51.
Issue is fouling plug when choke used to start ,bike won't start from cold with out 4 kicks on full choke then let choke out and she fires up blows smoke then runs fine.Can ride it for a day but the plug gets fouled on the next cold start and only on Choke ,which I proved by starting from hot with clean plug no choke ran it for couple of minutes plug was ok .Tried it with choke start ran 3 minutes checked plug was black on it's way out !.Using the lp gas clean method to save the plug but it's frustrating and it's totally necessary to use the choke to initially start from cold ,like i say 4 kicks then off the choke and a good kick and she's a way running ,dosen't fire with out using choke initially .Warmed up it starts easily no choke .Any idea's I'm favoring changing to a FCR carb to solve this
Issue is fouling plug when choke used to start ,bike won't start from cold with out 4 kicks on full choke then let choke out and she fires up blows smoke then runs fine.Can ride it for a day but the plug gets fouled on the next cold start and only on Choke ,which I proved by starting from hot with clean plug no choke ran it for couple of minutes plug was ok .Tried it with choke start ran 3 minutes checked plug was black on it's way out !.Using the lp gas clean method to save the plug but it's frustrating and it's totally necessary to use the choke to initially start from cold ,like i say 4 kicks then off the choke and a good kick and she's a way running ,dosen't fire with out using choke initially .Warmed up it starts easily no choke .Any idea's I'm favoring changing to a FCR carb to solve this
