Well, I put some 25mm handle bar risers on tonight, I am 6 ft tall, and these seem great.
Whilst wresting putting the bars back on the risers, I noticed a 3 pin connector seperated. I took the front headlight asembly off, and saw a 4 pin AND a 3 pin terminator dangling not connected, coming from the speedo. I did find the other end to the 3 pin connector, but broke the connector tab when they join, so I hope the cloth tape holds up on that one - I guessed these two join together.
However, why is there a 4 pin connector coming from the speedo flapping in the breeze? Can someone please confirm that there FE390 has a 4 pin connector not connected to anything on their bike too; and confirm there is no 3 pin connector loose and this should be connected.
Thanks in advance.
Fizz
PS. with the 25mm bar risers, the clutch cable is tight on handle bar full lock.
Whilst wresting putting the bars back on the risers, I noticed a 3 pin connector seperated. I took the front headlight asembly off, and saw a 4 pin AND a 3 pin terminator dangling not connected, coming from the speedo. I did find the other end to the 3 pin connector, but broke the connector tab when they join, so I hope the cloth tape holds up on that one - I guessed these two join together.
However, why is there a 4 pin connector coming from the speedo flapping in the breeze? Can someone please confirm that there FE390 has a 4 pin connector not connected to anything on their bike too; and confirm there is no 3 pin connector loose and this should be connected.
Thanks in advance.
Fizz
PS. with the 25mm bar risers, the clutch cable is tight on handle bar full lock.
