Fe 600 1993 with delorto carb jetting ???

happier · May 23, 2015

Hi there been out on the bike a few times since I got it runs great but seems a wee bit leen top end not much the plug is clean and there is no black smoke from the exhaust ever is this good or should there be a bit ???? If I need to riches it up can I lift the needle or do i need to get jets

Rainerio · May 24, 2015

Oh god NO not again. Just kiddy. You can try that and see. But I'd try the main jet (bigger)

happier · May 24, 2015

Cheers lol I'll strip carb let u guys know what size jet in it

and were the needle is .

Rainerio · May 24, 2015

If you think it's the main jet. I trick I know of if you have the right set of drill bits and a caliper you can drill an old main jet to a bigger size or if it's to big you solder it back up and redrill it again to different sizes. Getting the drill bits can be more then you might want to pay then just buying the jets. But if you have the bits then why not. I know this will work on brass jets. By the way there are different sizes of needle jets and don't solder them. I don't think I need to say this but don't solder or drill with it still on the carb or bike.

happier · May 25, 2015

I get what u mean I will just get a jet kit if needed

but if u were stuck it would be hand to drill it out

Search

Search

Fe 600 1993 with delorto carb jetting ???

happier

Rainerio

happier

Rainerio

happier

Similar threads

Register CTA

Recent Discussions