Fe 350 won't start

phillboy · Apr 2, 2017

Help needed please while trail riding today I feel and broke my front light on my 2013 fe 350 but from that point on the bike won't start nothing at all at the switch ? I tried the fuses and all ok so a little stuck any ideas ????

Sent from my iPad using Tapatalk

Taffy · Apr 2, 2017

sorry....you'll just have to trace everything through. do you have a key or is it key-less?

you need power to the leccy button and you want to get a signal when you press the starter button. that's the start point anyway.

Taffy

FE350 · Apr 2, 2017

Will it turn over or is everything dead?

phillboy · Apr 2, 2017

No nothing at all as if there's no power, I'm taking a proper look later today as Had minimal tools with me yesterday

Sent from my iPhone using Tapatalk

FE350 · Apr 3, 2017

Check both ground and power from your battery and the junction to your fuse panel. I am also thinking that you might want to look at your harness at impact point on your front plate as you might find the plate cut the harness?

Smash101 · Apr 3, 2017

It will be the main fuse, you must of created a short when you broke the light. The main fuse is not located with the rest of the fuses. Correct me if I'm wrong but I believe it's under the battery.

Sent from my iPad using Tapatalk

phillboy · Apr 3, 2017

Smash101 said:
It will be the main fuse, you must of created a short when you broke the light. The main fuse is not located with the rest of the fuses. Correct me if I'm wrong but I believe it's under the battery.

Sent from my iPad using Tapatalk

Checked that there all good

Sent from my iPhone using Tapatalk

phillboy · Apr 3, 2017

phillboy said:
Checked that there all good

Sent from my iPhone using Tapatalk

I stand corrected it was main fuse looked good swapped it with spare and that was broke to [emoji45][emoji45][emoji45]everyday a learning day thanks for your help just need to source a new head light

Sent from my iPhone using Tapatalk

Smash101 · Apr 3, 2017

Just carefully check for shorts as the second fuse may have been ok when installed and was buggered again after hitting the starter. Have a look around the starter for damaged wires, normally the smaller fuses will blow before the main fuse.

Sent from my iPad using Tapatalk

Dillygoat · May 26, 2018

Same issue

I had the same issue happen today on my 2013 fe350... Got it home, battery is fully charged, fuses are all good, no cut wires or damage anywhere... But yet all I get is a click when I hit the button... Yikes.... I am at a loss.... Is it the starter???

Search

Search

Fe 350 won't start

phillboy

Taffy

FE350

phillboy

FE350

Smash101

phillboy

phillboy

Smash101

Dillygoat

Similar threads

Register CTA

Recent Discussions

Recent Discussions