FE 03 650 High comp? / wont start..

Hi,

Got my FE 650 03 mod out for the spring and are trying to start it up, but it wont... It was a little hard started last year aswell, but it would start..

The situation is:
I have a spark on the plug, fresh fuel and a new battery. What bugs me is that the compression is harder than I remeber it to be. The starter will stall if i don't decomp it. (can't remember if this is normal). It will easily turn the engine around if decomped. I even broke the kickstart axel when trying to kick start it. Had a spare one, so it is replaced an working. But It even feels much harder to kickstart when on TDC.

-Should it start on the starter if decomp'ed?

-I'm pretty sure I lined up the primary gear and "the other gear with the one dot" when i reassambled the clutch, but can this be the problem?

-Do I need to adjust the valves?

-Any other suggestions?

The valves where ok.

The problem with the compression was that when I fixed the kickstart axle I removed the clutch and placed the primary gear and balancer gear one tooth of..

Got it running when pushing it down a hill, but not on kick- or el-start. So nothing mechanical anymore, think I have a stator issue.. low spark and wrong ohms. So moving over to Electrical..

By the way thanks for the replay.