I have a Husaberg FC470 and it won't kick start, but will start when it gts towed. Its got a weak spark, but changed plug ect.. Any Ideas please?
FC470 won't kick start!!
- Thread starter 724_trevor_2008
- Start date
this can sometimes be the classic sign of a failing sem stator, first you need to check it with a multimeter you need to look for
between wires
red/black 3000 ohm +/- 10%
green/black 168 ohm +/- 10%
if this is your problem i can help you, as i rewind sem stators.
at £120 with free return postage ( to anywere in the world ) and 12 months warranty.
cheers kris
between wires
red/black 3000 ohm +/- 10%
green/black 168 ohm +/- 10%
if this is your problem i can help you, as i rewind sem stators.
at £120 with free return postage ( to anywere in the world ) and 12 months warranty.
cheers kris
Joined Nov 2001
17K Posts | 773+
Ely, England
724_trevor_2008 said:
stator is an obvious one as mentioned by the salesman. also....
you can have what appears to be a weak spark because you've been kicking the crap out of it and covered the plug in fuel. this then makes it a poor conductor and thus the weak spark.
look to get the ignition timing mark re-marked on the flywheel
then start the bike and strobe and adjust the ignition. put simply you want it to be 1mm to the left of centre as you look through the hole.
tappets at a 1/6th of a turn
get new jets in the carb
new cam chain
a new iridium plug
regards
Taffy
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
