fc 470 wiring

spenno · Sep 11, 2005

hi everyone thanks for your hlep on the last question
i am converting my 2002 fc470 to the road jst wondered if anyone could assist with the wiring loom
i have replaced the stator and connected the cables up as follows
ye-ye
gn-gn
bk-bk
rd-rd
blue to regulator
2nd ye-rd on loom
2nd rd- nothing
br- nothing
or- nothing

also on rear light i have -gn-br-wh

and on the loom i have -gr-vt-br

coul anyone tell me the correct order thanks for your time :?

Taffy · Sep 11, 2005

spenno

owners doc sir! we have the wirting from the SEM there! also don't forget that the downloads has all the wiring for you as well.

regards

Taffy

spenno · Sep 12, 2005

thanks taffy

wired it up under the instructions of the fe model as the wiring on the fc edition does not show lights etc is this correct?
kicked it up lights worked for 2secs then died, kept it running and the lights would not work again took the stator off to inspect and the flywheel fell into peices so ordered a new one could this be the problem to loss of power to lights ?? :?

thanks spenno

BundyBear · Sep 13, 2005

Check the stator well while you have it apart for possible damage when the flywheel magnets came loose.

Husby · Sep 13, 2005

Connections

I don't know if you saw the wiring diagram on the owners manual, if you don't here is the connections:

GENERATOR:

YE - Regulator/Rectifier 2nd connector from right
YE - to light switch
Blue - to ground
Red to red on the coil
Green to Green on the coil
Black to black on the coil

COIL (Ignition module)

Gray to Hi/LO switch
White to HI/LO switch
Orange to Kill button
Black to ground

Hope this help

spenno · Sep 28, 2005

followed ur advice husby still no joy lights do not work :?

Search

Search

fc 470 wiring

spenno

Taffy

spenno

BundyBear

Husby

spenno

Similar threads

Register CTA

Recent Discussions

Recent Discussions