Exhaust rocker arm doesn't click

Jayyyxxx11 · Oct 18, 2018

Adjusting my clearances 1/6th turn but the exhaust side rocker arms don't move or click like the intake ones do...
Can't be right can it?

Taffy · Oct 19, 2018

do one at a time. loosen one off a long way. then swop them.

you are at TDC exactly? it has to be within 5mm and not 20mm (Ok thats the same as 20 degrees). TDC only.

Taffy

Jayyyxxx11 · Oct 19, 2018

It's ok
Had another look this morning and all is good
Thanks anyway

husabutt · Oct 19, 2018

Be sure to adjust your valves while the piston is at TDC on the compression stroke and not at overlap TDC.

WArdogG · Oct 19, 2018

My guess is that thet the decomp arm could have been touching the exh rocker when you did your first measurement, or atleast, I've had the same issue once and that was the culprit.

Jayyyxxx11 · Oct 21, 2018

Thanks for the heads up people
Exhaust side is a fair bit tighter to move than the inlet

Search

Search

Exhaust rocker arm doesn't click

Jayyyxxx11

Taffy

Jayyyxxx11

husabutt

WArdogG

Jayyyxxx11

Similar threads

Register CTA

Recent Discussions