Hey guys who makes or sells a nice sano Exhaust heat shield for that gap behind the foot peg on the pipe side that tends to find the inside of your boot & melt the leather onto the pipe?
Joined Mar 2001
222 Posts | 1+
Lisbon - Portugal
If you pick a piece of aluminum with about 1,5/2mm thickness, you can made one by yourself. Better you support it by 2 bolts. 1 in the exhaust mount near the kick and the other on the bolt which fix the side panel.
I've made one, and it's OK.
I've made one, and it's OK.
. Can you put some in your gallery please.I just installed a carbon fiber heat shield from e-line and works really fine. It was pricey, but you can remove it when buy a new bike. there are two sizes: 6" and 8". The 6"fits good enough.
We are buiding heat shields for our 650's. We should have our first production run available in a few weeks.
I don't have a photo of the production version, but you can see the prototype on our site, in the Photo gallery section, 1st photo. The headpipe shield was unpainted, and will be a bit longer. The tailpipe shield is black, just behind the pipe. Both will be powder coated.
www.2moto.net
We're not making them fancy, or pricey. Prices to come. Sorry for the shameless plug-
Brett
I don't have a photo of the production version, but you can see the prototype on our site, in the Photo gallery section, 1st photo. The headpipe shield was unpainted, and will be a bit longer. The tailpipe shield is black, just behind the pipe. Both will be powder coated.
www.2moto.net
We're not making them fancy, or pricey. Prices to come. Sorry for the shameless plug-
Brett
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
