easy stalling and hard to start

duke999s999 · Sep 27, 2009

I have a 2010 FE390 theres 11hours on it and i got the ecu flashed. Its always had problem starting i would have to give it a little gas for it to turn over even that wont always get it started. My buddy has a 09 FE450 and that thing starts no problem you just press the starter. 1 second later itll start with out even touching the throttle but mine if i dont touch the throttle itll just keep spinning over for like 5 seconds and you can hear it trying to turn over but wont... Also it stalls really easily even with the idle turned up.What can be the problem or does anyone else have the same problem??

Kemano · Oct 6, 2009

Have you checked to make sure you don't have an air leak? My bike has an exhaust leak at the head and I have had some similar problems. My thought is that the O2 sensor may be getting false readings which may be a factor in some of the problems you mention.

wildman · Oct 7, 2009

Dont know what the possibility is of your timing being out but sounds like something wasn't right from the get go. If it's only got 11hrs on it, why dont you take it to the local Berg dealer to sort out ? Surely it's still covered under warranty ?

Clay · Oct 7, 2009

Duke,
Sounds like you have some issues with the bike. Who did you buy the bike from? I talked to the head of Husaberg's tech department and he said to take it back to your dealer and have them call Charles Jirsa for some help getting your bike sorted out. Tell them to call me if they don't have Charles/ phone number.
Clay

Search

Search

easy stalling and hard to start

duke999s999

Kemano

wildman

Clay

Similar threads

Register CTA

Recent Discussions