Doing a rebuild and wondered if the cam sprocket that is pressed onto the other side of the idler gear need to be pulled off before splitting the cases or can you do it afterwards?
Does the idler gear/cam sprokecket need to come off 4rebuild
- Thread starter birdwoodburg
- Start date
Joined Nov 2001
17K Posts | 774+
Ely, England
RE: Does the idler gear/cam sprokecket need to come off 4reb
you can do it afterwards with prise bars. it's in the doc under rebuild - i think!
when building the engine back up, get the left main in first then the new intermediate shaft inner bearing and then slip the shaft in and fit the sprocket, the gear and the nut, the lot! tighten by any means there and then for piece of mind. then continue with the rest of the rebuild.
regards
taffy
you can do it afterwards with prise bars. it's in the doc under rebuild - i think!
when building the engine back up, get the left main in first then the new intermediate shaft inner bearing and then slip the shaft in and fit the sprocket, the gear and the nut, the lot! tighten by any means there and then for piece of mind. then continue with the rest of the rebuild.
regards
taffy
Dont forget to heaten the cam sprocket and to cool (freeze) the shaft, if not its almost impossible to fit the gear.
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
