Differences from Fe to FC
Compression rate Fe-12.5-1 FC 12.8-1
Does camshaft difference make a difference?
I would like help
Compression rate Fe-12.5-1 FC 12.8-1
Does camshaft difference make a difference?
I would like help
Differences de Fe 450 and FC 450
- Thread starter Xinasa
- Start date
-
- Tags
- 450 differences
Joined Nov 2001
17K Posts | 773+
Ely, England
you need to look up the parts list.
the FC would have had a 35mm ID ouytlet on the tailpipe wjile the FE had 25mm.
flywheel
ignition cover
pick up of the FC has 2 spacers under it.
I think they had the same piston?
I think they had the same cam
the valves would have been Ti tanium valves i reckon.
lots of blingy bits.
frmae wouldn't have a sidestand bracket.
minimum electrics
Taffy
the FC would have had a 35mm ID ouytlet on the tailpipe wjile the FE had 25mm.
flywheel
ignition cover
pick up of the FC has 2 spacers under it.
I think they had the same piston?
I think they had the same cam
the valves would have been Ti tanium valves i reckon.
lots of blingy bits.
frmae wouldn't have a sidestand bracket.
minimum electrics
Taffy
I think the head is the same, and the difference of compression rate is due from different piston head... I think....
The valve on the FC are in titanium.
FC is 4 speed and without countershaft.
Chamshaft I don't know if is the same, I think the FC have to do a camshaft more "pushed", but I dont know...
On my FC 550 there is this camshaft:
The valve on the FC are in titanium.
FC is 4 speed and without countershaft.
Chamshaft I don't know if is the same, I think the FC have to do a camshaft more "pushed", but I dont know...
On my FC 550 there is this camshaft:
Last edited:
Yes one of the big differences is even the compression rate, yes the cam trees is different from the FE models for the FC
Joined Nov 2001
17K Posts | 773+
Ely, England
My parts book shows no difference between an FC and an FE in;
camshaft
piston
there is a really small chance that the the FC stroke is 0.1-0.3mm longer creating a higher compression but I can't see it myself?
I had about 55bhp out of my 400 so having it out of a 450 should be a piece o' piss.
regards
Taffy
camshaft
piston
there is a really small chance that the the FC stroke is 0.1-0.3mm longer creating a higher compression but I can't see it myself?
I had about 55bhp out of my 400 so having it out of a 450 should be a piece o' piss.
regards
Taffy
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up