This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Counter balancer bearing replacement

B

badsted

Joined Apr 2015
29 Posts | 8+
Copenhagen
Hey husabergers,

I am replacing my counter balancer bearings, and as i see my bike only has 1 bearing and not the double bearing. I have bought 2 custom made bearings from orangeberg, but i cannot remove my current bearing. I have warmed up my counterbalancer to around 170 degrees celcius, but still cannot knock it out. Does it have to be pressed, or is there another easy way to do it? Is it only able to go out one way?

Hope you can help.
Thanks, Christian.
 
If I remember correctly, that version has the bearing locked into place axially by a welded sleeve. Is there a small laser-weld, some 3 mm further out radially, from the outer ring on one side of the CB?
 
Yes it actually looks like it! How do i replace this with my double bearings i've got? is it even possible..

Thanks
 
At the time, you needed to buy a whole new CB if the bearing seized, and it did...
Everything is possible, but I think it will take a lot of machining. Are new CB available as spare part?
 
Oh well, seems like a new CB would be what i need then..

It should be this part no. i guess:
80030057100

Can you confirm that?

Thanks for the help.
 

Similar threads

Sandtorven
2001 650 Counter balancer help
Replies
10
Views
751
Taffy
Taffy
F
FE570 low idle issue, outside of the usual suspects! (I think)
Replies
1
Views
418
rikschipp
R
1
70degree engine and clutch slave bleeding...
Replies
4
Views
1K
tpayne
T
K
AM fuel pump parts sourcing problems
Replies
1
Views
1K
o6550
o6550
R
2005 Husaberg FE550 - New first time owner
Replies
6
Views
777
Taffy
Taffy

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions