Joined Jul 2001
3K Posts | 1+
El Sobrante, Ca. 94803
Hi Dan,
Be certain to seal the radiator nipple lest your recovery system will be no more than a catch tank.
Dale
Be certain to seal the radiator nipple lest your recovery system will be no more than a catch tank.
Dale
Joined Feb 2003
3K Posts | 384+
Escondido, Ca. USA
Questions:
Is the Husberg radiator cap of a recovery design?
If so is it of a high quality recovery design?
Is the Husaberg cooling system even capable of coolant recovery?
So...........if the standard Husaberg cap will allow some recovery will it allow enough to prevent hoses from collapsing during negative pressure (cooling)?
Is the Husberg radiator cap of a recovery design?
If so is it of a high quality recovery design?
Is the Husaberg cooling system even capable of coolant recovery?
So...........if the standard Husaberg cap will allow some recovery will it allow enough to prevent hoses from collapsing during negative pressure (cooling)?
Joined Jul 2001
3K Posts | 1+
El Sobrante, Ca. 94803
Joined Apr 2002
3K Posts | 11+
Phoenix Arizona
I think Dale is referring to where the nipple is pressed into the filler neck. I have had a few leak at that point. I think I just used some two part epoxy to remedy the leak.
I have been using a recovery system off of a Yamaha Raptor on a few bikes now with good results. I wish I could take credit for it, but I got the idea from another member. You can usually source them through ebay for $10-15 bucks. There should be some pictures in gallery.
I have been using a recovery system off of a Yamaha Raptor on a few bikes now with good results. I wish I could take credit for it, but I got the idea from another member. You can usually source them through ebay for $10-15 bucks. There should be some pictures in gallery.
Joined Jul 2001
3K Posts | 1+
El Sobrante, Ca. 94803
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
