This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Clutch needle rollers, what size?

Joined Jul 2003
330 Posts | 0+
Nth Tasmania ( Australia )
I need to replace the 2 needle rollers in behind the clutch basket, but the parts manual describes them as "bushes"? Does anyone possibly know the size of them so I can get them after market? Also can the the water pump seal be purchased a/market?
Thanks,
 
What happened to the old one?
An option if you don't have the old one is to measure the shaft and with that measure and with the inner basket go to a specialized rollers shop to try to find a suitable one. This bearing is needle type.

About the water pump seal probably you can find also in a very good seal shop. pay attention that this type of seal is special with two lips like the ones used on electrical water pumps but smaller.
 
Husby

So you are he only one of 25 with some kind of idea???? I thought people here were more knowledgable and helpful than this?????????????
Yeah I ended up taking the old ones into a bearing shop and they discovered that they had hair line cracks in both? I thought I could see one but not the other, only under a magnifying lens. Havent got them yet, but there were 25mm i/d.
 
I mostly just use my dealer for parts needed. The seal was like $4. I bought two. And the bearing so far so good.
 
I tried matching the clutch bearings up at BSL which are one of the UK's biggest bearing stockists......No joy, the good news was that they genuine Berg ones were only £6 each.

Here is a list of the parts that BSL stock along with the genuine husaberg part codes. I cannot take credit for this, it was the good work of Vormanuk (cheers mate :wink: )

HTH

Deaks


Main bearing, ball --- 360.001.01 --- 6206C4 ---£12.83

Clutch side main --- 350.003.01 --- FPM30X52X7AS --- £2.21
bearing seal

Generator side ---360.008.01 --- FPM25X40X7AS ---£1.93
main bearing seal

Shift drum bearing ---360.026.01 --- 61806 --- £8.36

Main shaft bearing, ---360.004.01 --- 6205C3 --- £2.46
clutch side

Main shaft bearing, --- 360.002.01 --- 6203C3 --- £3.60
ignition side

Output shaft,
ball bearing --- 360.002.01 --- 6203C3 --- £3.60

Output shaft,
roller bearing --- 360.017.01 --- NJ205ECP/C3 --- £12.02

Output shaft, seal --- 350.006.01 --- NBR30X42X7AS --- £0.99

Counter balancer/cam
lower sprocket,
shaft bearing --- 360.036.01 --- 619052RS --- £7.75

Cam bearing --- 360.000.01 --- 6201C3 --- £2.98

Cam chain --- 200.045.04 --- 110038PITCH:REN63 --- £0.14

Cam chain soft link --- 200.066.02 --- 110038-NO107 --- £0.35

Water pump seal,
outboard --- 350.000.01 --- NBR10X18X4A:SIM --- £2.60

Crank nipple seal ---350.014.01 --- NBR10X18X6A --- £2.30

Gear shift shaft seal --- NBR12X22X6AS:SIM --- £0.68
 
F-i-H deaks :roll: :roll:

where were you when i needed this info for my sheet!

great detail and yes thank vormanUK.

this info will go into the info sheet. don't ask when we'll get it as schwim is a very busy man at the moment.

Taffy
 
If it helps just discovered the KTM EXC item is the same and on £5:17 a pair rather than £6 each for the Berg item....HTH
 
deaks

Thanks for the info Deaks! I should have the clutch needle rollers a/market by tomorow, they will be Timken brand. They were available in other brands but more expensive. These will be aprox $10 Aust each.
Couldnt get the w/pump seal a/market tho???
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions