My clutch master cylinder seems to be leaking near the lever adjustment on my '09 570. Is this a common problem that is easy to fix? Is it something I can disassemble and clean or do I have to buy a new master cylinder?
Joined Jan 2013
48 Posts | 3+
Bham AL
Realize this is an old thread but I just went through this.
KTM and some aftermarket sources like Moose offer a rebuild kit. If you have a 9.5mm Magura the Moose PN is 1132-0912 and is ~ $30 USD
https://www.denniskirk.com/moose/clutch-master-cylinder-repair-kit-1132-0912.p384730.prd/384730.sku
Install and bleed up through the bottom at the slave. Pumping will be very difficult is not impossible.
KTM and some aftermarket sources like Moose offer a rebuild kit. If you have a 9.5mm Magura the Moose PN is 1132-0912 and is ~ $30 USD
https://www.denniskirk.com/moose/clutch-master-cylinder-repair-kit-1132-0912.p384730.prd/384730.sku
Install and bleed up through the bottom at the slave. Pumping will be very difficult is not impossible.
Similar threads
Want To Buy
FE 570 cylinder and piston
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
