Clutch Bleeding FE650

userslo · Nov 15, 2012

Hello,

What is the easiest way to bleed the clutch? I was trying sort of things with no success. Probably all wrong, now my clutch line cylinder and system is full of air. Can I bleed with vacuum pump?

Regards

Taffy · Nov 15, 2012

you need to reverse bleed, so pump upwards that is all you needed to do.

oh that and did you fit a new slave piston O ring before you started?

regards

Taffy

userslo · Nov 15, 2012

Hello, ok vacuum is no go. Will try with pressure, but syringe is so hard to press. I did loosen bleeding niple. Please can you tell me dimensions of o ring? Vinton or nbr70?

Thank you.

Taffy · Nov 15, 2012

you must make sure that the clutch lerver or its adjustment is off completely and not under any pressure from the adjuster or handguards etc.

go check your old one.

regards

Taffy

Idle · Nov 15, 2012

2005 manual shows part# 0770045015 45,00x1,5 NBR 70

userslo · Nov 16, 2012

Thanks but this info is not accurate!
This O ring is seal for COVER of clutch cylinder. You can't buy separate o-ring for piston from husaberg.
800.32.066.000

I did check clutch lever, it is not compressed at all. Adjustment is out completely. I don't know what could be wrong. Although I don't have original Ktm syringe. Just regular 100ml one.

Taffy · Nov 16, 2012

770291016
this is the slave piston 'O' ring number

Taffy

Search

Search

Clutch Bleeding FE650

userslo

Taffy

userslo

Taffy

Idle

userslo

Taffy

Similar threads

Register CTA

Recent Discussions