Carburettor for FE 600 1998 model
- Thread starter Chichor
- Start date
-
- Tags
- 1998 600 carburettor model
Joined Dec 2002
759 Posts | 0+
western NC
My guess would be a FCR 41. The owner`s doc has better information about this. I don`t know what size carb was on your bike to start with. I upgrated to a PHM 40 on my 501 and that helped a lot. Some more details would be helpful.Chichor said:
Take care.
Joined Aug 2006
19 Posts | 0+
Northwest of Spain (Pontevedra)
RE: Re: Carburettor for FE 600 1998 model
Hi Bill!
Thanks a lot for your comments!
Finally I could find the parts I needed for the original carb Dellorto PHM 40 ZS, so I decided to rebuild my carb.
I have the original setting in owners manual so will be very easy to fit the carb with properly setting.
I have heard that Keihin FCR carb provides to Husaberg bikes a nice and sweet response as well as more power, so I thought to buy it, but setting this carb will be a difficult job due my knowledge!!
Regards!
Hi Bill!
Thanks a lot for your comments!
Finally I could find the parts I needed for the original carb Dellorto PHM 40 ZS, so I decided to rebuild my carb.
I have the original setting in owners manual so will be very easy to fit the carb with properly setting.
I have heard that Keihin FCR carb provides to Husaberg bikes a nice and sweet response as well as more power, so I thought to buy it, but setting this carb will be a difficult job due my knowledge!!
Regards!
Joined Dec 2002
759 Posts | 0+
western NC
Re: RE: Re: Carburettor for FE 600 1998 model
Best of luck.
Tip: When you clean these carbs make sure all openings are clear. Those carbs are not to bad just take your time. It is a good idea to clean these carbs at least once a year. I think once you get everything back together and running you will be happy. It takes a lot of work to dial a carb in and you have to know what your doing.Chichor said:
Best of luck.
Joined Aug 2006
19 Posts | 0+
Northwest of Spain (Pontevedra)
RE: Re: RE: Re: Carburettor for FE 600 1998 model
Thanks Bill,
I will follow your comments about clean all openings.
I will set the carb as per owner's manual and after will try to set it carefully step by step, testing different PJ and MJ as well as needle jet and needle clip position.
Yes!!...I will need luck!
regards!!
Thanks Bill,
I will follow your comments about clean all openings.
I will set the carb as per owner's manual and after will try to set it carefully step by step, testing different PJ and MJ as well as needle jet and needle clip position.
Yes!!...I will need luck!
regards!!
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
