kzoo said:
Thanks, that worked.
Now I'm having problems with the kickstarter fit under the tank. It seems like the little recess in the tank is too short lengthwise to let the foot part of the kicker in and out under the tank. Anybody else experience this? It almost seems like I would need to lose about half an inch off the foot part to get it back under.
When I changed my tank over I ended up using O-rings for fuel type fittings. I got them at a local auto store. They are more gray in color. The black ones would fail after a month or so.
I would like to see a photo of your seat/tank screw fix.
And Yes we all need graphics.
I would like to see a photo of your seat/tank screw fix.
And Yes we all need graphics.
Yes, Berger the tank i had instaled was the first tank that leaked on me at both petcocks.
Took tank to disc sander smoothed surface at both petcocks to get rid of low spot at
center then used sleeve around pick up pipe below intake port ,had to lube hose twist
into place, feeling good now!
Took tank to disc sander smoothed surface at both petcocks to get rid of low spot at
center then used sleeve around pick up pipe below intake port ,had to lube hose twist
into place, feeling good now!
berger said:
I had to change out my regular black o-rings for gas proof gray ones. I got them at an auto store.
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
