This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Bad stator or bad cdi/coil ?

S

Sebbe

Joined Aug 2014
4 Posts | 0+
Sweden
I have a husaberg fe501 -02 with no spark. i have checked the stator and i get readings:
Red - black 3100ohm 17 Volt
Green - black 165 ohm 0.3 volt
Should be ok?
where do i connect the blue wire? to ground?

Cdi readings:
from sparkplug cap to black wire 8000ohm
cap - red nothing
cap - green 33 mil ohm
cap - black 8040 ohm
cap - orange 33 mil ohm
cap - grey 99000 ohm
cap- white 40000 ohm

what readings should i be getting from cdi?
also i have no battery. does the cdi need 12volt to work?

Thanks for any help..
 
Last edited:
Hej.
Blue wire to the ground, the stator readings seems ok.
I have 2 new CDI and will measure them later this week.
The CDI does not need battery.
Regards
Jampe
 
Last edited:
Today i opened up the cdi and find that one of the resistors was broken.. It should have 190ohms it had nothing.. Do anyone know where i can buy a new one?

Thank you jampe!
Do you perhaps have a used cdi for sale or a broken one? If so i am interested in one if i cant find the correct Resistor for my cdi..
 
Last edited:

Similar threads

R
Dead flywheel?
Replies
31
Views
2K
Robzerg
R
G
2001 Fe501 - No Spark
Replies
3
Views
472
Taffy
Taffy
I
Aprilia AF1 stator / pre-99 Husaberg FE
Replies
1
Views
547
Taffy
Taffy
0
03 fc550 no spark
Replies
3
Views
805
Taffy
Taffy
F
2002 FE501 Stator rewind no good?
Replies
5
Views
1K
Alfy
A

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions