Hi everyone. There is a little wear on my auto decomp tip. I doubt putting a small weld and reprofiling a suitable way to remedy a worn auto decomp tip since welding may ruin toughness of steel. then would it not be more vulnerable to wear? It make sense for a temporal cure. Any comment from anyone who tried it?
Auto decomp tip reprofiling
- Thread starter Faust
- Start date
-
- Tags
- auto decomp reprofiling tip
Joined Feb 2003
3K Posts | 384+
Escondido, Ca. USA
Welding a blob on the decomp was actually one of the original ways to help improve starting on the 01-02 models. After you get it welded and ground down to the correct size ( I believe .8mm - 1mm of exhaust lift is what you are looking for ) why not have it cryogenically treated to make your work hold up for awhile.
http://www.cryoscience.com/auto/
http://www.husaberg.org/wiki/index.php/Wear_items_red_alert
http://www.cryoscience.com/auto/
http://www.husaberg.org/wiki/index.php/Wear_items_red_alert
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
