Hello i was wondering if anyone is interested in aluminum husaberg tanks.I am in the process of building a prototype.Soon as its done i will post pics.As of now im building one for my 1991 501.Also im working on a race exhaust with a stepped head pipe.
alum. fuel tanks
- Thread starter husabeast33
- Start date
really?
i would be most interested in an aluminium tank for a 98 fe 400 my friend but only if it would be possible to fabricate a tank with at least a 3.5 gal capacity but more would be better. let me know wat it would run me if your willing to do it
i would be most interested in an aluminium tank for a 98 fe 400 my friend but only if it would be possible to fabricate a tank with at least a 3.5 gal capacity but more would be better. let me know wat it would run me if your willing to do it
Joined Jun 2007
4K Posts | 1K+
south east WA Australia
RE: really?
just had a few tanks start leaking on the welds and at seemingly random locations through the alloy, this is after about 18 months use.
old trick for cars, truck etc:
degrease the inside of the tank with a water based degreaser tip some high quality epoxy resin in and coat the inside of the tank, use lots then tip out the excess.
works extreemly well on the alloy tanks too
will be making carbon tanks next time.
just had a few tanks start leaking on the welds and at seemingly random locations through the alloy, this is after about 18 months use.
old trick for cars, truck etc:
degrease the inside of the tank with a water based degreaser tip some high quality epoxy resin in and coat the inside of the tank, use lots then tip out the excess.
works extreemly well on the alloy tanks too
will be making carbon tanks next time.
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
