This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

air in clutch?

Joined Apr 2011
26 Posts | 0+
Finland
hello!

my berg has been working fine, except clutch is not perfect. when engine is cold or warm clutch works fine, but after riding like 30mins or more and i pull the lever, i feel the pressure only at very bottom of the lever. It feels like there would be air in clutchfluid. Its strange because it does it only when its warm.. Should i bleed it?

ty already.
 
I would fit a new O ring on the slave piston and then using a syringe = bleed in reverse = upwards.

regards

Taffy
 
Mine started doing the exact same thing after I installed a Revloc Dyna Ring.

I was thinking it might be because I installed the Dyna Ring with the bike laying completely on it's side....? When I torqued down the pressure plate, fluid squirted out of my master cylinder reservoir. I thought that maybe I got some air in the system then??? After I bled it, it was acting a bit better, however it still barely works after it gets warm???? :?
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions