adjustable fork rake enduro/supermoto

shooter114 · May 10, 2012

After doing some reading on supermoto set ups I've discovered that you need to bring the fork rake inwards towards the engine. Is this true on the 09 Fe450 enduro?

Who makes an adjustable rake fork / triple clamps set up , rough cost and set up time between enduro off road and supermoto on road ?!

Idle · May 11, 2012

Easier and much faster to raise the forks a bit. I think it will give near the same results.
KTM adjustable offset triples are $300-$400 I think. You have to pull the steering stem and rotate it 180 degrees to change it. Easier just to leave it how you want it and change the triples back and forth?

You just need wheels, a 320mm rotor and a relocation bracket. If you want to spend more and race, I would invest it in a bigger front caliper and M/C.

Mine has a 16/18 as delivered, but I've never bothered with it. It turns pretty sharp as is. My FS has a shorter swingarm than an FE and I've got the rear axle forward of center also.

Taffy · May 11, 2012

friend of mine made the same observation at the weekend. as I'm aware nobody in the world bothers makes a set of clamps that change the rake. they change the trail.

so if one clamp moves: so does the other by the same amount.

regards

Taffy

Search

Search

adjustable fork rake enduro/supermoto

shooter114

Idle

Taffy

Similar threads

Register CTA

Recent Discussions