Adding headlight/tail light to 2010 husaberg 450 fx

dallas31 · May 9, 2014

Is there anybody who has added a headlight and tail light to this bike, I have the tail light but is there a harness to buy. I know I can probably make up a harness but which plugs do you use.

tourist · May 9, 2014

I can confirm that it's been done, at least.

Do you have a wiring harness diagram? There's one for the 570 floating around at least.

I can snap some pics of the harness in my street-legal 570 if you want - anything particular you'd like to see?

SRG · May 14, 2014

I have a 2010 FX450 that was "dualsported" by the previous owner. He used components from Sicass racing. It's a nice set up, LED lights for everything except the headlight, front blinkers in the handguards, good switchgear, wires all labeled, and the right connectors to fit the stock plugs. Sicass might not be the least $$, but it's good kit and they are very friendly and helpful. Most recommended.

Michigantrailrider · May 16, 2014

SRG said:
I have a 2010 FX450 that was "dualsported" by the previous owner. He used components from Sicass racing. It's a nice set up, LED lights for everything except the headlight, front blinkers in the handguards, good switchgear, wires all labeled, and the right connectors to fit the stock plugs. Sicass might not be the least $$, but it's good kit and they are very friendly and helpful. Most recommended.

I agree 100%. I have the same bike and a SICASS Racing kit. I have had no problems at all and the kit was an easy install.

Tillbuilt · May 17, 2014

You will need to install the FE wiring harness part #81211075120. This is a add on harness to the stock FX harness. Then all of the after market and stock stuff will plug in. This harness is under $100.

Search

Search

Adding headlight/tail light to 2010 husaberg 450 fx

dallas31

tourist

SRG

Michigantrailrider

Tillbuilt

Similar threads

Register CTA

Recent Discussions

Recent Discussions