This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

a bit of electrical help please

2short4husa

2short4husa

Joined Aug 2006
49 Posts | 0+
reading uk
hello all

i recently bought a fc 470 that only has 1 ignition key and ive managed to lose it.

im going to get another ignition or maybe put a switch hidden out of the way,anyway could anyone tell me the wires i have to join to do away with the ignition so i can ride it for now as i keep blowing the 10 amp fuse

thanks in advance

by the way im trying to put a picture on the site but it never downloads !! how do i do it??
 
2short4husa said:
hello all

i recently bought a fc 470 that only has 1 ignition key and ive managed to lose it.

im going to get another ignition or maybe put a switch hidden out of the way,anyway could anyone tell me the wires i have to join to do away with the ignition so i can ride it for now as i keep blowing the 10 amp fuse

thanks in advance

by the way im trying to put a picture on the site but it never downloads !! how do i do it??
Click to expand...

Welcome 2-short,

I have attached the wiring schematic for the 03.

To kick start and run the bike without any battery power, disconnect the Orange wire comming from the Key switch.

Then if you want battery power, you disconnect the Red and the Red/Yellow wire comming from the key switch then jumper the Red and Red/Yelllow wires in the wiring harness connector sockets.

Regards,

Joe
 

Attachments

  • Pages 34 from OwnersManual03-EN.pdf
    37.1 KB
RE: Re: a bit of electrical help please

cheers joe for the info, but what does jumper mean!
 
2short4husa said:
cheers joe for the info, but what does jumper mean!
Click to expand...

You run a separate insulated wire from the Red wire socket to the Red/Yellow socket to connect these 2 wires in the harness together.

If you do this make sure the wire is the same size or larger than the the red wire in the harness and you have crimped or soldered spade contacts on the wire the same as are on the wires on the keyswitch. This jumper will carry all of the lighting power so you mave to make good contact.

Regards,

Joe
 
RE: Re: a bit of electrical help please

thanks a lot joe all soughted :D

you dont no anything about a noisy topend do you? see my other post-they keep you busy and skint these husas dont they.
 

Similar threads

B
Want my headlights to stay on after bike off
Replies
1
Views
589
Taffy
Taffy
B
Spark for 2-3 seconds then nothing.
Replies
10
Views
575
mosierz48
M
T
570 engine rebuild help!
Replies
5
Views
519
TurboYoda
T
F
FE570 low idle issue, outside of the usual suspects! (I think)
Replies
1
Views
418
rikschipp
R
I
Dream come true, sort of...
Replies
26
Views
2K
ihminen
I

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions