This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

98 501 FEE not starting - need parts help

Joined Aug 2012
1 Posts | 0+
Hello out there I am hoping for a bit of help trying to get my Berg back up and running. I have had a hard starting issue
that has progressed to the point that the starter is not engaging at all. I am in the process of replacing the battery with the beefier CTZ7S and I have a Yamaha R6 starter on the way but.. I still need to replace the sprague / clutch
Is this part available for this old of a bike? FYI from what I have read the culprit is probably the auto- decomp and I hope to address that next. I am in the US - New Mexico to be exact and have just enough tools and mechanical exp. to get myself into lots of trouble. Thanks in advance for your help - Mike

1998 501 FEE Albuquerque, New Mexico
Ride trails mostly but occasionally need the bursts of insane speed the husaberg is known for.
 
Hi

The sprage its still available, at least in europe, but its not cheap. Tryed other sources without any luck.
If its not bad you can try to repalace only the outer spring.

About the R6 starter I don't know if it fits, because thats for the next engine generation, just don't know ????

About auto decomp, you have to check the spring, and you can buy a stroger from Taffy, you can also upgrade for the newer autodecomp, it fits.

:cheers:
ZAGA
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions