Hello everyone, my family has a 600FE, shock absorber core diameter of 50MM, the front shock absorber oil leakage. Bought a new oil seal, but do not know the amount of oil shock absorption. Can you tell me what you know? A single shock absorber damping oil plus how much? Or from the shock absorber to the upper level to determine how much the amount of filling.
Thank you
Ned37, about two shock absorbers, the liquid level of the damping oil (air gap) is 120mm right?
Husabutt, maintenance data for the shock absorber is not found.
Ned37, about two shock absorbers, the liquid level of the damping oil (air gap) is 120mm right?
Husabutt, maintenance data for the shock absorber is not found.
Joined Feb 2003
3K Posts | 384+
Escondido, Ca. USA
Look at page 47. It says, "Fill the forkleg with oil just under the edge of the fully compressed inner-tube."
Joined Nov 2001
17K Posts | 773+
Ely, England
the piston in the reservior chamber wants to be 100mm down from the end of the cap when the shock is fully open/out. 100mm + or - 10mm it does not matter. you measure through a little screw hole at the end.
2.5W oil.
180psi nitrogen pressure.
regards
Taffy
2.5W oil.
180psi nitrogen pressure.
regards
Taffy
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
