i am about to replace a blown head gasket with a valley force copper gaskett can someone tel me head torque preasurer and do you require a soft link for the timeing chain any info thanks negy
570 head gaskett replacement
- Thread starter negy
- Start date
-
- Tags
- 570 gaskett head replacement
Joined Aug 2009
1K Posts | 346+
Charters Towers, Australia
check here viewtopic.php?f=5&t=12862#p108202.
I didnt break my cam chain, just pulled the tensioner and then the rocker arm shafts, the cam slipped right out. I used some lock wire to keep it from falling in to the bottom of the motor. Apply copious amounts of beer to spanner operator.
I didnt break my cam chain, just pulled the tensioner and then the rocker arm shafts, the cam slipped right out. I used some lock wire to keep it from falling in to the bottom of the motor. Apply copious amounts of beer to spanner operator.
Joined Aug 2009
1K Posts | 346+
Charters Towers, Australia
negy said:
Yeah mate from valley force as well, beeen flogging it since I put it in and no dramas.
disembleld today head gasket rooted leaking between laminations preasurising radiator easy job drop header pipe lift throtle body radiators off first cam tencener cam retainer ring rocker shaft bolts rocker and shims pull camshaft out make shore not to get shims mixed up undo head bolts pull head up and to the left there is not mutch room to play with timeing chain guides watch out for also new gasket and 4x to finish after night shift next week checked shim gap 2476ks inlet .15 ok exaust .17 ok
Joined Aug 2009
1K Posts | 346+
Charters Towers, Australia
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
