This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

570 FE tps tuning ???

I

Itsa

Joined Mar 2016
10 Posts | 7+
australia
been a 2 stroke man most of my life, got a bit of catching up to do with these modern 4 strokes

the TPS om the 570

do I need to play with it..
Iam pretty fussy on jetting etc and Iam fitting a Fuel Air ration gauge atm and have a Vortex ECU on the bike as well

can anybody point me in the right direction re info on the TPS on the 570

thanks

edit ...don't worry I found some links ...and I can't seem to delete my original post
 
Last edited:
There's some great Youtube videos about setting the voltage on the TPS.
Look for "KTM TPS setting", as it's the same procedure and voltage across the board.
They seem to be happiest around .62v. They're very touchy as well. Best to set them with the engine running as well.
While not needed, there's a couple options for a jumper that you'd put inline between the TPS and its plug ( with test points to hook up a volt meter)
Suzuki actually sells a factory test harness that works as well.

Good Luck!
 
  • Like
Reactions: 1 person

Similar threads

cypher
Cyphers FR3
Replies
17
Views
5K
TodColvin
T
D
Dale E O's 2009 Idaho City 100 ride report
Replies
13
Views
3K
kzoo
K

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions