Joined Jun 2015
26 Posts | 4+
brussels
Hi guys, i am looking for a quick reply, cause I am stuck with no clutch and I need the bike urgently... 
On my fs 570 2011, I ended up with no pressure in the clutch lever, no leak on the MC, but he was empty..so after reading many threads here i concluded it was usual issue with the slave.
I ordered a sigutech one and tried to install it today. After removing the slave, and wiping the pushrod, i spotted engine oil was leaking into engine case. IS it supposed too?
In case this is normal, it would mean that if slave leaks, oring damaged, mineral oil can go the opposite way, straight to the engine...mine probably did, should I change engine oil, or is it unecessary (too little volume of mineral oil)?
thanks for you replies!
On my fs 570 2011, I ended up with no pressure in the clutch lever, no leak on the MC, but he was empty..so after reading many threads here i concluded it was usual issue with the slave.
I ordered a sigutech one and tried to install it today. After removing the slave, and wiping the pushrod, i spotted engine oil was leaking into engine case. IS it supposed too?
In case this is normal, it would mean that if slave leaks, oring damaged, mineral oil can go the opposite way, straight to the engine...mine probably did, should I change engine oil, or is it unecessary (too little volume of mineral oil)?
thanks for you replies!
