Hi All, I have a problem with my 2002 501 flywheel, some of the magnets have come adrift, are there any suitable after market manufactures which sell an improved flywheel and stator as a kit? Regards Aussieberg.
501 flywheel magnet problem
- Thread starter aussieberg
- Start date
Hi,
If you can get the loose magnets out, use Loctite 326 structural adhesive, this is what I use and it works a treat, but make sure the magnets and flywheel are cleaned before applying, also make sure the magnets go back in the same way they came out.
Regards
Sparks.
If you can get the loose magnets out, use Loctite 326 structural adhesive, this is what I use and it works a treat, but make sure the magnets and flywheel are cleaned before applying, also make sure the magnets go back in the same way they came out.
Regards
Sparks.
Just an update on the magnet problem, as there was one magnet missing so I ended up purchasing a used flywheel from the USA. All should be OK now. Regards Aussieberg.
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
