This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

4cs Fork problems

Joined Jan 2013
2 Posts | 0+
Norway
Hi,
Early this year I purchased a new 2013 Husaberg TE300. The bike is great, but I have one big problem..
The front forks in my bike was starting to act poor, and it was discovered by the dealer that something broke inside.
I was promised all new internals in the forks. This happened in early May. (Had about 15 hours on the bike) The new internals are expected in September....
I live in Norway, and the summer riding season is relatively short. And I bought the bike to be able to ride it and race it.

I received a front fork from the dealer to use while I was waiting for my forks, but this is from a MX-bike and is too stiff and the bike is very unbalanced..
I now get to ride it, but this is not what I was looking for..
I am starting to get a “little” frustrated with this. :angry: Has there been any more issues with this fork problem?
 
There a few threads over at Ktm talk about his problem..I would just take the fork to a good suspension guy and get them fixed.

looki
 
If you weigh more than 170lbs, the stock forks can be a little soft and undersprung. Either add oil, or change springs out for higher rate ones. That might have prevented parts breaking inside.

On the MX fork, yes, they'll be stiffer and real stiff as you get to the last 2-3" of travel. On those, have the dealer take 15-30mL oil out and see how they feel. At least you'll be able to ride.
 
Thanks for the replies guys! I have now received new forks with 2014 spec/internals. Feels very good and i cant wait to test it some more. :bounce3:
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions